 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Series 295 (R) Commercial 24mm Diameter Composition Element Long Life Variable Resistor Features * Low noise * Long life 1 million cycles * Joystick appliations * Wide resistance range * RoHS compliant Electrical and Mechanical Specifications Resistance Range Linear taper: 10K ohms through 1 megohms Consult CTS for audio taper Resistance Tolerance Standard: 30% Special: 20%, 10% Rotational Torque 14~144 gf-cm (0.2~2.0 in-oz) Rotational Life 1,000,000 cycles Shaft Information Available for round, flatted, knurled, or slot metal shaft Diameter: 6.35mm (.250") Consult CTS for custom-made metal and economic plastic shaft Mounting Information Bushing Mount Diameter: EIA standard 3/8-32 UNEF-2A thread Standard length: 9.53mm (.375") or 6.35mm (.250") Consult CTS for custom-made metal and economic plastic bushing Locating Lugs Standard: Two lugs Available: No lug, or one lug (left or right) with terminals facing inward Power Rating Under 100K ohms = 1/3 watt @ 55C Above 100K ohms = 1/4 watt @ 55C Joystick applications = 1/6 watt @ 55C Insulation Resistance 100 megohms minimum @ 100 VDC Operating Temperature -10C to +85C Total Rotational Angle Mechanical angle: 3005 Effective angle: 30to 290 Linearity Standard: 5% Special: Consult CTS for better linearity 1-2 CTS Electronic Components (c) 2006 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 10/25/06 T295 Metal Shaft, Bushing Mounting, Type "T" Solder Lug Terminals MTG. SURFACE 11.3 .445 "A" 0.8 "L" .031 0.4 .016 11.1 .438 BASE OD 24.3 .957 REF. 4.160.08 .164.003 CLEARANCE HOLE 2.080.08 .082.003 O23.8 .937 15.8 .622 16.0 .630 1.570.08 .062.003 10.410.08 .410.003 10.410.08 .410.003 1.570.08 .062.003 3/8-32 UNEF-2A 2 CCW 8.4 .331 1 CLOCKWISE CIRCUIT WIPER CW 3 1 2 12.7 .500 20.8 .819 3 MOUNTING HOLE DETAIL DIMENSION: mm inch S295 Metal Shaft, Bushing Mounting, Faston Type "S" Formed Terminals MUNTING SURFACE 11.3 .445 "A" 0.8 "L" .031 0.4 .016 11.1 .438 BASE OD 24.3 .957 REF. 4.160.08 .164.003 CLEARANCE HOLE 2.080.08 .082.003 O23.8 .937 16.0 .630 1.570.08 .062.003 10.410.08 .410.003 10.410.08 .410.003 1.570.08 .062.003 3/8-32 UNEF-2A 2 CCW 1 CLOCKWISE CIRCUIT WIPER CW 3 1 2 12.7 .500 20.8 .819 3 MOUNTING HOLE DETAIL DIMENSION: mm inch Ordering Information 295 T 2 20 SHAFT LENGTH "L" FROM MOUNTING SURFACE 1/32"INCREMENTS EXAMPLES: 20- .625" (15.9 mm) 24- .750" (19.11mm) 28- .875" (22.2 mm) 32- 1.000" (25.4 mm) R CODE 103 253 503 104 504 105 103 RESISTANCE CODE EXAMPLES B 1 TAPER 1- LINEAR *2- 10%AUD *3- 10%CCW AUD * Available minimum 270 effective angle. 1 1 EFFECTIVE ELECTRIC ANGLE 123440 50 60 270 TERMINAL STYLE T- SOLDER LUG S- FASTON MOUNTING STYLE "A" BUSHING LENGTH: 1/32"INCREMENTS EXAMPLES: 2.250" (6.35mm) 3.375" (9.5mm) 8- 1.000" (25.4mm) 1- TWIST TAB MOUNT RESISTANCE 10 K 25 K 50 K 100 K 500 K 1Meg RESIST TOL A- 10% B- 20% C- 30% SPECIALS 1- TWO LUGS 2- LOCATING LUG RIGHT SIDE 3- NO LOCATING LUG 4- LOCATING LUG LEFT SIDE METAL SHAFT TRIM R- ROUNED F- FLATTED .375" X .156" (9.53 X 4.0mm) K- KNURLED EIA S148 24 TEETH S- SD SLOT .047" WIDE X .063" DEEP (1.2mm X 1.6mm) 2-2 CTS Electronic Components (c) 2006 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 10/25/06 |
Price & Availability of 295S220F103A21
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |